View Single Post
  #1   Report Post  
DanaK DanaK is offline
Junior Member
 
Posts: 11
Default Need a thermal switch

Hi,

I've got a project in mind but I'm having problems finding the right equipment for it. I need a thermal switch or thermostat, whichever. I'd like to set up a set of water misters to run when the outside temperature gets to between 90 and 95 degrees. The spray system would need some kind of thermal switch or thermostat that was either weather proof or having a long coil of tubing to the sensing bulb that would allow the main switch unit to be out of the weather. The switch would then run a solenoid valve, probably something like the 24vac automatic sprinkler valves after applying electricity to a 120vac to 24vac step-down transformer.

The application for this is to provide a precooled air source to my air conditioner's compressor-condenser coil. Since we're in a hard water area I was figuring I'd need to provide some kind of conditioned water for this system to prevent the scaling up of the coil. I've seen some in-line chemical anti-liming filters for water misters and evaporative coolers in Lowe's but I was wondering if the added chemical(s) that these would provide wouldn't just add to the problem. The chemical is supposed to keep the calcium in suspension for evaporative a/c coolers as well as these water misters but, in my mind, the chemicals have to be deposited somewhere even if the mist is fully evaporated by the time it passes through the coils. Would I probably have to install a small r.o. unit for this? They don't make much water (10gpd usually) but the misters don't run all the time and don't use much water when they do.

All of this does cost a little but the electrical load reduction on temperatures from 95 to 105 degrees could be reduced by 23% and sometimes more from what I read.

This is just a crazy idea I had one sleepless night while listening to the outside compressor run ad nauseum trying in vain to catch up and not making much headway. The idea has been patented, darn it, by a person in Plano, TX but I don't have his/her address to see if they marketed any kind of kit for this.

Thanks for anyone's help.
Dana