Good suggestion, I'll get a piece of wood.

Mike

"ameijers" wrote in message
...

"Mike" wrote in message
news:Nnolg.8360$1G2.8128@trnddc06...

"Edwin Pawlowski" wrote in message
et...

"Mike" wrote in message
news:KZnlg.20762$YI2.17654@trnddc01...
Hi, I just installed my first window air conditioner, GE AMG0LJ. The
window frame is metal and the AC installation
kit is for a wood window frame. does anybody sell AC installation
kits
for metal window frames .

BTW, the GE AMG0LJ 6,000BTU is very quite and high efficiency

How about some clarification. In the subject line, you say "Storm
Window
Frame" but now you say it is a metal window.

Where I live the storm window sits outside the regular double hung
window.
Sometimes the bottom of the storm frame is higher than the sill inside.
You just cut a piece of wood the proper thickness to raise it up equal
or
slightly above the storm frame. Cut the wood to length and lay it
between
the two windows. Use a 1 x 3 or a 2 x 4 or whatever you need.

If you are talking metal frame inside windows, different story. If it
is
a typical double hung, you drill a hole in the frame and use a sheet
metal
screw to hold in on top of the AC expander frame.

It's a metal window frame. There's a high spash guard so I don't need to
build it up using wood.
I'll use sheet metal screws and sheet metal.

Unless the metal is real thick, don't be suprised if the window starts
buzzing like mad when the AC kicks on. Metal on metal is often real noisy.
Personally, if there was a painless way to lay a board in there to be the
weight-bearing surface for the AC unit, I would do it. Think of it as a
vibration damper.

aem sends...