What model do you have?

http://www.generac-portables.com/ser...ch_results.cfm

Assuming you go through the checks in the manual, check to see if the pump
is turning with the motor. If the key broke, the motor could spin free
without turning the pump.

Or else call the number on the front page of the manual for someone who
actually should know the answer.



"Arnie Goetchius" wrote in message
...
I have a 2300PSI Generac Pressure Washer powered by a 6 HP Tecumseh. The
water coming out doesn't have much more pressure then a garden hose. I
thought it was due to a dirty nozzle so I used the nozzle cleaner kit but
that did not improve the pressure.

I'm wondering if there could be a problem with the spray gun or are there
other places I should look for an obstruction?