From memory, I believe on the remote it is Display, 5, Vol +, Pwr. To save
your damage after making the changes press Mute, Enter.

Take care, that many of the set-ups in the service menu must be performed
with the proper test and calibration setup. The service manual will be
required for some of these set-ups.

It is possible to lock the set out of operation, if the wrong mode is set
for the option type. If this happens, the only fix is to change the uPC
chip.

Saving the changes makes them permanent, until the next update and re-save.
If you make a change that is in error, and did not save the change, unplug
the set from the AC mains for about 10 seconds to reset it.

Normally the service mode is required if a critical component has been
changed that is effecting the operation of the set. If there is a change in
performance of the set, proper service should first be done before using the
service mode. For over 95% of the repairs, changing the defective components
will fix the set without having to enter the service mode.

--

JANA
_____


"Vince" wrote in message
...
Hi All!
I need to know how to bring up the factory menu on this Sony KV32S12 Color
TV.
Thank you for any help I can get.
Vince