DIYbanter - View Single Post

In article , says...
This was because I did not
wait long enough between the tung oil coating and the top coat of poly.
Once I figured this out, I have been very happy. If you;re in a hurry,
oil-based polys do not seem to have this problem.

Quite. In fact I sometimes concoct a mix of oil based poly, boiled oil and vege
turps and flood it on, wipe off any excess and buff with a lint free cloth once
it stops soaking in and before it gets sticky, and it's touch dry within a
short period of time. Can use as a base for poly, or reapply several times to
get an improved oil-like finish.

-P.

--
=========================================
firstname dot lastname at gmail fullstop com