View Single Post
  #6   Report Post  
Posted to sci.electronics.repair
Sam Goldwasser
 
Posts: n/a
Default OP-Amp Configuration

M.Joshi writes:

Just to clarify a few points:

I have come across a capacitor on the input which is to block DC; and
also in the feedback loop which gives an Integrator function I believe
however, in this circuit, there was a resistor in the feedback loop and
another resistor and capacitor in series to ground from the inverting
input?

Thinking about it now, could it form some sort of filter (Low pass)?


How about drawing the circuit?

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.