b wrote in message
oups.com...

n cook ha escrito:

Passing a house when the resident was putting a broken vcr in the bin.
She gave it to me instead. 20 minute repair job but now stuffed without
a
dedicated remote control it would seem.
Goodmans VN9500S, a universal remote just controls the same transport
functions as on the front of the m/c. Stuck in on-screen menu mode to
alter
output modulation frequency which stays altered in memory via remote
even
after powering down but always starts again in this menu mode. I cannot
close the menu to enable Record even with Scart and active function
switching pin.
Any ideas as can only use as play-only machine , or fork out 17 GBP/35
USD
just to close down the menu function ?

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

get down your local flea market/car boot sale. There's usually at least
one person with a box of remotes at such places.
-good luck, B.


Anyone ever monitored machine specific IR pulse train and then generated
fudged missing codes ?