Thread
:
TXF2899 - Sound but no picture!
View Single Post
#
3
Posted to sci.electronics.repair
Dani
Posts: n/a
TXF2899 - Sound but no picture!
The flyback transformer is common in these units to give no raster, or
raster after 20 minutes or so. FUH29A001 (S) I think. Measure the G2
at the CRT board. The picture will likely come back. Also, the vertical
could be bad. Turn up the G2 & you MAY have just a line. Dani.
wrote:
I am working on a Samsung TV model TXF2899 that has sound but no
picture. The filaments are lit. Screen and HV are good. The picture
appears to be blanked. I checked the CRT, it checks good. It appears
however that the signal from CXA1477AS is no good. The input is good.
I am suspecting IC501 (CXA1477AS) to be defective but am still not
quite convinced. I'm not quite sure if I am missing something. If
anyone know or has had a similar problem please respond! Thanks!
Tyrone
Reply With Quote