Machinist tools- what should a begginer buy?
In article , Anthony says...
0-6 calipers (Brown & Sharp, Starrett, Mahr, or Mitutoyo)
Much though I like the starrett six inch calipers,
I would have to advice a new worker to go with the
mitutoyo, they are much more robust.
0-1 Micrometer and maybe a 1-2, depending on how big of work you are
doing.
You can find a lot of micrometers inexpensively on
ebay. I would not buy these new. I would start
with a simple thousanths reading one inch mic.
Precision Combination Square set (Starrett)
I would put that last on the list, honestly.
Set of Small bore gauges
Yes, the telescoping type. Very handy.
Magnetic Base,
Last word indicator, 0-1 indicator and 0-3 indicator
Especially the last word type.
Radius Gauge
Thread Gauge
As others have mentioned, edge finders or
wigglers. Also a starrett automatic centerpunch
and a scriber. A couple of good six inch rules
if he does not spring for the 12 inch combination
set.
Jim
==================================================
please reply to:
JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com
==================================================
|