South of Portland - many Intel sites and Tektronix near by.....

Martin

Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH & Endowment Member
NRA Second Amendment Task Force Charter Founder
IHMSA and NRA Metallic Silhouette maker & member


nospam wrote:
"DoN. Nichols" wrote in message
...

According to niteviewer :

Some pictures can be seen at:
http://portland.craigslist.org/tls/161990819.html

O.K. Not the same model as mine.

It looks to have a L-00 spindle nose, based on what I can see of
the chuck retaining ring in the first image. If so, then it can be
fitted with the necessary hardware to handle 5C collets in the spindle
nose.

It appears to be missing the cover for the outboard side of the
headstock.

You should be able to find the model number and the serial
number on the right hand "foot" of the bed. This will probably require
cutting the band and cranking the carriage to the left a bit.

The model number will be helpful in identifying it to potential
purchasers. The serial number will be helpful when it comes time to get
a manual from Clausing.

I *guess* that Tigard is in Washington state (given the
"portland" as part of the URL.


Tigard is in Portland OR (more or less)














----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----