Spark is OK. THe orignal problem was that it would start in full choke but
would stall when I tried to turn the choke off.. As far as I can tell all
the gaskets and what not are in the right orientation ( after the third
try - long story involving a kitty cat that wanted to help).

Will look at the jet. I will look at the fuel filter again too. It looked OK
when I had it out but when I originally took the carb apart I noticed some
crude on the inlet screen (in the carb). I had a previous leaf blower that
had the fuel hose split allowing it to suck all sorts of junk into the carb.
Thats what I was expecting when I started this project.

"m Ransley" wrote in message
...
Are you sure its getting spark.