On Fri, 05 May 2006 04:53:10 GMT, "Maxprop" wrote:


I doubt if it makes much difference, but I put a nylon stocking over the end
of the motor. AND I use a 1-8 to 11/4-8 adaptor which puts the faceplate or
chuck nicely away from the motor. But you are correct--it is poor placement
of that motor behind the headstock.

Max

good idea, Max, I've thought of using a plastic disk to keep the chuck from
over-tightning, anyway...

as to the OP, it would be a LOT worse if the fan wasn't in it's own section,
though..
Mac

https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm