Need an internal gear
Bill Marrs wrote:
Need quantity one of the following.
Internal spur gear (like a ring gear with the teeth on the inside)
54 tooth, 24 pitch, 14 1/2 degree pressure angle. Face length of .875,
OD of 3 inches.
Material brass/bronze---thinking 660 bronze.
Any suggestions for a source??
Thanks,
Bill
If you can't find a source, as I suspect you might not, consider having
a shop wire EDM it out for you.
Someone should chime in with a source for a Cad program to create the
profile file.
Finding one ready made seems doubtful, having one custom cut will be
wickedly expensive, EDM might be the way to go.
Pete
|