"Don Pearce"
One more thing - the Neve mic pre has a pretty poor noise performance.
At -128dBu equivalent at the input, that is about 6dB above pure
thermal noise.
** Absolute bull****.
Thermal noise in a 20kHz BW and 150 ohms
= 0.22 uV or -130.9 dBu.
That is 4 or 5 dB more noise than they should be
achieving.
** Wrong, it is a little over 2 dB.
Get you calcs right - dickhead.
( You forgot to allow for the 0.775 volts bit. )
BTW
This is what Rupert has to say on the matter:
http://www.rupertneve.com/notes_mic.html
http://www.rupertneve.com/notes_noise.html
NOTE
his comments re 1000 to 1200 ohms input load being "normal".
........... Phil