"Folkert Rienstra" wrote:
"Jaz" wrote in message
A have a Maxtor 20GB 2B020H1 which is doing the spin-up then spin-
down thing. The controller says ATHENA ATA2-PLUS, FBII 301430100.
I found this site http://www.hddtech.co.uk/MaxtorFailureSymptoms.htm
and my symptoms match precisely. So I bought a working 2B020H1 used.
I swapped the contoller but the drive isn't recognized at POST. I
swapped the controller back to the spare-parts drive and that one
works fine. Worth noting is that with the spare controller, the
original drive no longer spins down after spin up.
Then I noticed that the spare controller part number is slightly
different. The new one reads
"ATHEN II/POKER".
Oops, I meant "ATHENA II/POKER"
Apt name. Describes the process of recovery very neatly.
Should have been named "ATHENA II/CRAPSHOOT"
Well, on ebay I found a "ATHENA ATA2-PLUS, FBII 301430100" 2B020H1
drive, which is 'tested' -- Fingers crossed!
PS, the folks at the link above were very helpful, and given me an
incentive to send them as a last resort. Very nice blokes.
What's interesting is why this controller would not be detected by
the BIOS when attached to the old platter assembly. I verified
that the geometry and the Maxtor part numbers are both the same.
Anyway, aside from trying to find another spare controller that
matches exactly, and before I resort to an $800+ professional
recovery, is there anything else I should try?
Thanks.
Jaz
(Please excuse the 'burp' when replying (b))
(Please excuse the 'burp' when replying (b))