Sticky finish problem
On 15 Apr 2006 09:29:01 -0700, "Doug" wrote:
-The table was stained with pigment gel stain first
-The poly was thinned and applied with a rag (6-7 coats)
-The finish dried fine
-The stickiness started about 8 weeks after use.
-The table has been cleaned with Murphy's oil soap, and nothing else.
I would tend to think Murphy's law applies to the Murphy's Oil soap
leaving a residue which is sticky, try cleaning the table with
something which won't damage the poly but is a solvent.
Mark
(sixoneeight) = 618
|