The techs here help people like you all the time. Most of them know that
trying to DIY a repair on a TCE product is usually a waste of time. The
learning curve can be steep, and the problems can be many. Just negotiating
the service literature is a chore if you are not familiar with it. Getting
info out of Thomson is nearly impossible if you are not an ASC. I work on
nearly all brands and have been servicing projection television nearly since
the earliest consumer products became available. I have access to several
hundred knowlegable techs on several forums and listserves, and have access
to all of the service literature. Still, I find that if I don't work on a
lot of a particular TCE chassis, it is problematic and wasteful for me to
attempt to service them. Art knows this, as do others here who would tell
you to take it to a tech who does a lot of them. He has helped lots of
folks here. Believe it or not, he was helping you. If it was a simple
problem like a convergence output or PS problem, you would have received
appropriate suggestions.

BTW, if you get it working, replace that cheesy mylar mirror with a first
surface glass mirror, do the mechanical and electrostatic focusing, turn the
contrast down to about 40% of what it is from the factory, adjust the
brightness and color appropriately, and you will improve the pix more than
anything you might do in the service menu.

Leonard

"Alex Tsiboulski" wrote in message
.. .
I agree with you that it's a POS. Especially for anything that isn't being
sent as an HD signal. I don't watch TV so until I got my 360 I was
disappointed with it. That's why I'm willing to risk fixing it myself,
cause if it breaks more, I'll have an incentive to go out and buy a quality
one.

This was my first HDTV, and it was an impulsive buy. As are most of my
major purchases.
Same thing happened with my first computer, and camera. Seeing as how I'm
now a photographer and can repair computers. I plan on going the same
route with this TV.

I'm sorry if it sounded like I was degrading all techs, I'm sure there are
the honest ones out there. I was simply venting because all the ones I've
called have been really condescending with me. Whenever I asked them how
much a certain service would cost, meaning I didn't need an estimate. They
would get very rude with me and insist I didn't know anything.

I know the case is "Who's calling who". But It really sets me off when any
business treats their customers in a rude fashion.

As for the lousy picture, yup. That's why I'm in this mess to begin with.
That's what I was trying to adjust.


Alex



"Leonard Caillouet" wrote in message
...
While I think Art was a bit terse and condescending, you will get little
help if you go off generalizing that techs rip you off because they
charge $50 for an estimate. If you think you can figure it out, buy the
equipment, the manual and go about learning how to fix the POS that you
have. Frankly, I send them to the local TCE ASC because they are more
familiar with them and they can be a PITA to work on. I know this
because I have similar model that a client declined the estimate on that
I fixed as a learning experiment like you describe. I find the sets to
be less than worthy of my time and effort. It also has a lousy pix.

Leonard

"Alex Tsiboulski" wrote in message
.. .
As if being permissive was such a bad thing.

I understand that I may be calling people for support, but that doesn't
mean they should be acting like assholes and treating me like I am
completely ignorant. Be it Thompson's customer service, or any local
repair shop, I've seriously had enough.

I'm better off buying a Chipper Check, some schematics, and maybe
WinSTIPS.
My time is better spent learning a new skill, than dealing with
assholes.

Much rather go that route than pay overcharging repairmen. $50 for them
to give me an estimate? It costs me the same amount to buy a Chipper
Check. Which might be all I need. Then from there they charge me
inflated labour and part replacement costs. No thanks. Why bother when
it might so happen that I need to send it back in. I rather know how to
fix it myself time and time again, if need be.

If my TV happens to break beyond repair during my attempts, then boohoo.
I'll buy a new one, and be happy with the fact that I picked up some new
skills and have a brand new TV.

My initial question was asking if anyone knew what the problem could be.
I wouldn't have even bothered posting here if I wasn't considering
repairing it myself.


Alex



"Art" wrote in message
. ..

It is totally obvious that by your permissive actions you renedered
your product inoperable. Enough Said! Get the thing into a shop, pay
for the repair, and don't screw with it again. Clear enough
Alex??
"Alex Tsiboulski" wrote in message
...
Art,

though my knowledge in television electronics is not as far reaching
as it is in the PC realm, I'm far from an "average" consumer. I know
my hardware, and I knew the risk I was taking as soon as I went into
that menu. In my defense, curiosity did get the best of me when I
entered the geometry menu, but I did not save any settings, I barely
even moved a slider in any direction. So I'd love to know how the same
result wouldn't have happened to a professional.

I'd appreciate some useful input from you, or none at all. Your
opinion had nothing to do with the current situation.

"Art" wrote in message
...
Too bad the average consumer does not read that disclaimer before
playing with the "Serviceman Menu"!!IMHO. Seen too many that have
almost been relegated to the junk status by Tweaking by the
un-informed.
"kip" wrote in message
.. .
Alex best call a shop who has the chipper checker and tell them what
you have done.


"Alex Tsiboulski" wrote in message
...
I've had the RCA D52W20 for over 2 years now. It's served me well,
amongst all the bad ratings it's gotten. Today I found out about
the service menu, so I decided to play with that. 190+points of
convergence was a blessing. I then decided to see what was in
geomatry, so I shifted my screen to the left a little to compensate
for my PS2. All I remember after that was I either went up or down
and moved the slider on another option and the TV turned off.

Now all it does is the power blinks green and it makes the sound
like it's trying to startup.
Please any help would be greatly appreciated.

--
Alex Tsiboulski