cut pipes to weld a "T"
On Mon, 03 Nov 2003 17:05:40 GMT, "Karl Townsend"
wrote:
I need a "T" made out of two six inch 1/8" wall thickness pipes.
I need a way to mark a chalk line on each pipe so I can cut it with a torch
and then fit the two together and weld.
I did a layout like this in drafting class thirty years ago. Made each piece
out of paper. Cut them out and wrapped around the pipe to mark the lines. I
don't remember much else about it.
Anyone know how this is done?
Karl
|