On Tue, 02 Sep 2003 06:41:48 +0100, PoP wrote:

One thing to be very wary of in respect of cabling the suggested
solution, someone might decide to do some wiring work and start by
switching off at the consumer unit. By doing so they would assume
that all sockets in the house were dead.

Even if I pull out the main fuse and switch off the breaker I still
assume that everything is live until tested with a volt stick and even
then I check cautiously on first contact with tools/me.

If there are maintained circuits all the CU(s) should be labled with a
warning and each maintained outlet/fitting as well.

--
Cheers
Dave. pam is missing e-mail