View Single Post
  #12   Report Post  
Posted to rec.crafts.metalworking
Martin H. Eastburn
 
Posts: n/a
Default How do I demagnetize my radiometer?

The one we had at home as a kid had a glass hub.

If you have a metal one - did the needle eat it up and finally cut it ?
Have you turned it upside down and such ?


Martin
Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH & Endowment Member
NRA Second Amendment Task Force Charter Founder
IHMSA and NRA Metallic Silhouette maker & member


Jeff Wisnia wrote:
Martin H. Eastburn wrote:

Wrong - lost the vacuum in the bottle. Likely a slow leak and maybe
when the internals
got hot it went through the seal. Rather common.



But if that were the case, why would it run for 15 to 30 seconds when
exposed to sunlight and then get "stuck" when the rotating part wobbles
a bit so the "hub" touches the vertical needle and sticks to it as
though it were magnetized?



If you think it is magnetized - the vanes are Al or Mg - for light
weight.



I don't doubt the vanes are made from a lightweight material but it
looks like they are attached to a small metal hub stuck on the bottom of
the glass nipple resting on the top of the needle. It's that hub which
"sticks" against the needle when it stalls out.

I understand that these radiometers work better when there's a very low
pressure in them than they do at a hard vacuum. Something to do with
having the right amount of air molecules inside which get heated by the
dark side of the vanes and give that side a bit of a kick.

I know I can buy a new radiometer for less than $12, but my curious mind
wants to see if demagnetizing would "fix" this one.

But if you

want - pass it through a loop that is passing AC.

One of those is the color TV - remember - when you turn on the TV
there is a Twang sound -
that is the coil getting a shot of juice upon power. Keeps the tube
set.

Just put the unit on a wood table or such - at the center of the
screen and turn on the set.

Most won't let you do it more than once for a while... Just once or
twice is needed over time.



I'll probably make a coil or pull a scrap motor apart over the weekend
and see whether I can win this one with demagnitization. G

Jeff



----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----