On Wed, 05 Apr 2006 20:47:02 -0700, "William B Noble (don't reply to this
address)" wrote:
there is one more approach that has not been mentioned - presuming
your faceplate screws onto the spindle - affix another faceplate to it
with the nut facing the tailstock and use an air impact wrench to spin
it off
You're used to that big ol' lathe, Bill...
I can picture some poor soul spinning his mini around a few times with an impact
wrench.. *rofl*
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm