"Andy Hall" aka Matt wrote in message
...
On Wed, 5 Apr 2006 00:45:30 +0100, "Doctor Drivel"
wrote:

"Andy Hall" aka Matt wrote in message
news
On Tue, 4 Apr 2006 21:48:49 +0100, "Doctor Drivel"
wrote:

"Andy Hall" aka Matt wrote in message
m...
On Tue, 4 Apr 2006 10:19:03 +0100, "Doctor Drivel"
wrote:

Baxi and Potterton, stipulate that these air ejectors should be on
the
combined feed and vent pipe to expel air. They work very well. With
combined feed and vent a very low head can be obtained, so ideal for
loft
fitting of boilers. To alleviate fears of sludge accumulating in the
air
ejectors it is best to fit a Maganclean on the boiler return pipe,
which
grabs magnetite that causes sludge. The Magnaclean protects the
whole
system
too.

There is no reason that this problem should happen or one of these
devices needed as long as the system is correctly dosed with
inhibitor. It is dealing with the problem in the wrong way.

Matt, on a boiler change a Maganclean I would say is essential as
desludger
never gets it all out. If the system is not re-dosed, and 95% are not
,
then the Magnaclean prevents blockages. Got it?

This is bull****.

Matt, again..."If the system is not re-dosed, and 95% are not, then the
Magnaclean prevents blockages. Got it?

I don't buy that either.

Matt, again..."If the system is not re-dosed, and 95% are not, then the
Magnaclean prevents blockages". Got it?

Do you really think, in your wildest dreams that if somebody isn't
going to be bothered to have their system correctly dosed with
inhibitor that they will bother with one of these or that the type of
fitter that they are likely to employ will bother either?

Matt, most people don't know that you need to redose, hence descaling and
powerflushing is big business.

Matt, again..."If the system is not re-dosed, and 95% are not, then the
Magnaclean prevents blockages". Got it?