facing off a flat disk....
On Wed, 22 Mar 2006 22:56:54 GMT, "Karl Townsend"
remove .NOT wrote:
...
That gives me an interesting / odd idea. With the availability of
inexpensive VFDs that at their simplest can take their speed setting
from an analog voltage, it seems it would not be impractical to attach a
sensor to the lathe cross slide or possibly tool holder to setup a
constant linear velocity drive.
...
Constant surface speed is a standard item on most newer CNC lathes.
Karl
I assume to some max spindle speed or minimum diameter?
Pete Keillor
|