"Speechless" wrote in message
...
On Sat, 18 Mar 2006 02:43:31 GMT, "SteveC"
wrote:
Anyone got any plans to make a Snow Plow for an ATV?
Real men don't need no steenkin plans. If you have the ATV, use a
measuring tape on it.
For the blade, get a length of 1/4" wall x 30" diameter pipe, cut a
section out of it lengthwise.
Sounds mighty heavy
For the plow frame, get some square tubing and look at a photo of an
ATV plow frame, right he
http://www.deere.com/en_US/ProductCa...br=5953M&tM=HO
In the photo above, the semi-circular part is a 4" slice of 30"
diameter x 1/4" wall pipe cut in half and then the two halves welded
together.
This should be about all the information you need to get the project
done in a home workshop having just a cutting torch, drill press, and
a buzz box stick welder. Just add some imagination.
Don't forget a chop saw or band saw.