On 20 Mar 2006 10:15:33 -0500, Sam Goldwasser
wrote:

"Andreas Tekman" writes:

Sam Goldwasser wrote:
sck0006 writes:

On 18 Mar 2006 12:40:11 -0500, Sam Goldwasser
wrote:

Does anyone know of a free source for decent quality schematics?
***

Thanks. That would probably be adequate. There's no problem with the text
of the manuals, just the schematics. And this problem would seem to be
associated either with the power supplies or the CRT bias/intensity/Z
input circuits.



I found the 465B manual from bama.sbc.edu is nice: I can read the
schematics easily, and quality is alright for my repair purposes. Sam,
did you try this free source? don't forget about bama mirror at
edebris, for faster download.

Only thing you have to do extra is that you have to install the free
reader, for .djvu format. Even if it is old, it still works adequate.

That looks much better than the ones I have. Thanks. I knew
about the bama Web site but never bothered to download the djvu reader
before.

Any hints on getting pages to print with reasonable quality?

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.

I've got the schematics if you still want them. I was only able to
get horizontal amplifier, crt circuit, power supply, and the power
supply troubleshooting sections. Let me know...

Steve