View Single Post
  #3   Report Post  
Posted to alt.home.repair
Edwin Pawlowski
 
Posts: n/a
Default Plumbing for a water softener


"proudpapa" wrote in message

My thought is to create an above ground crock and sump, punch a hole
through the basement wall and then pump this water from this crock out
of the house. Is this a bad idea? Is there a better way to do this?
How much water can I expect to backflush?

Lots of questions... sorry. Thanks for concsidering responding.

R Thatcher


This is done all the time. For a tank, you can use a steel or poly drum, or
you can buy a sump tank. Most any sump pump can be made to fit and will
work well. A plumbing supply can fix you up with everything you need.

The real problem is where to pump the water. It is salty water and not good
for your lawn or garden. It cannot be pumped to an open sewer. If you have
freezing weather, you don't want to pump it any place outside.

It is best pumped into a drain, laundry tub etc. Do you have a drain line
running through the basement? A laundry room above the basement? It may
also be possible to run a hose from the softener to the drain pipe tap.
There is not a huge volume of water. Our softener at work is huge compared
to home installations (we soften about 10-12,000 gallons a day) and the
backwash goes to a drain pipe via a simple 5/8" garden hose and gravity.