"Allan Adler" wrote in message
...
If I understand correctly, what I need to do hand scraping is:
(1) a piece of metal to scrape
(2) a 3 cornered scraper
(3) bench level with milled surfaces (instead of an expensive surface
plate)
(4) Prussian blue oil paint
This would just be for practice. I wouldn't be planning to use the
resulting
scraped piece metal for anything at this point. Since it is only for
practice,
I don't know what size I should get. Presumably it should be steel, since
I am interested in possibly building a Gingery lathe someday, but Gingery
mentions that some of the cast aluminum parts will also require scraping.
I can order a flat piece of steel to scrape from a steel supply house.
I don't know if I can simply walk to my neighborhood hardware store to
get a 3 cornered scraper; even if they have 3 cornered scrapers, I'm so
ignorant that I wouldn't know if it is suitable for metal or whether for
some reason it should only be used on wood. I might have to order it,
which would involve shipping costs and maybe minimum orders. Ditto for
a suitable bench level with milled surfaces; but since it is just for
practice, maybe it doesn't matter what level I use. Blue oil paint I
can get from a local art supply store, probably for 5 or 10 dollars.
What I would like to know is how much the total ought to cost if I do it
as cheaply as possible and where I ought to get it from in order to
achieve
that minumum.
It occurs to me that I might also have to consider getting some kind of
grinder in case the scraper gets worn. Maybe at my present level of
commitment
and competence, it would be more cost effective just to get a spare
scraper.
One reason this particular exercise appeals to me is that, unlike
practically
any other metal working project I can think of, it can easily be done in
an
apartment without using much space and without making a mess (at least I
think not), and is probably rock bottom in terms of cost. Another is that
it really is a very basic skill which I'll need to develop sooner or
later.
If it happens that there are other metal working activities one can do
safely
and neatly in a tiny apartment for practically no money, I'd be glad to
know
about them.
I've read (but can't confirm from personal experience) that a carbide
scraping blade is much preferred to a HSS blade. Apparently the HSS blades
require *very* frequent sharpening. Perhaps someone here that does have
experience with both carbide and HSS blades will chime in with their
opinion.
Ignorantly,
Allan Adler
************************************************** **************************
*
*
* Disclaimer: I am a guest and *not* a member of the MIT Artificial
*
* Intelligence Lab. My actions and comments do not reflect
*
* in any way on MIT. Moreover, I am nowhere near the Boston
*
* metropolitan area.
*
*
*
************************************************** **************************