clare at snyder.on.ca wrote in message
...
Do any of you guys know if the little BernzoMatic type, and the stubby
Coleman type propane tanks are brazed together? I'm thinking of trying
to use one for the large cyl of a stirling engine and need to take it
apart to install the displacer, and then put it back together. If they
are brazed it should be a (relatively) simple job to separate and
rejoin the 2 halves..
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from
http://www.SecureIX.com ***

Hi Clare

If you had two very similar tanks, it might be easy to cut them both so
that one tank could be easily welded (or brazed) back together.

Jerry