Mark & Juanita wrote:
April 2006 Workbench has some information on cutting aluminum on a
tablesaw. They recommend using a regular carbide blade with a zero
clearance insert and also mounting the aluminum with double-sided
tape to a sacrificial piece of hardboard
Good point (the hardboard)...I lost a bunch of teeth on a thin kerf
blade I really liked one time when a thin piece of aluminum wrapped
around it
--
dadiOH
____________________________
dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at
http://mysite.verizon.net/xico