Ernie Leimkuhler wrote:
In article , mawdeeb
wrote:


Greetings Netizens, anyone know off hand what the value of the foot
pedal resistor might be?.

Or if an owner of a Hobart TR250-HF Tig welder would be so kind as to
look or measure the value of the foot pedal resistor for your machine
and report back, I would be very greatful. I already checked the owners
manual, no dice.

Found out what was causing my machine to trip breakers on start up.
(previous owner rewired amp select switch thru a shorted reactor coil).
Drew alot of current to get a weld going. With the short removed the
unit now fires up and only draws 10 amps idling. Even the high freq
works now. Hu rah.

Thanks in advance

Jim Vrzal
Holiday,FL.



I can check one of the ones at school.

Greetings, server has been down for a while. Trying to catch up.

Call out to Ernie - Your probably busier than a one-armed paper hanger,
but did you have an opportunity to check the resistor value on the
Hobart foot pedal at your school?

Thanks either way

Jim Vrzal
Holiday,Fl.



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----