"Toller" wrote in message
...
I have 4 PC333s. One of them has started jerking and jumping around. I
have read that the common problem is a small belt breaking, so I pulled the
bottom off and found the belt was fine.
However, the little pulley it goes around was seized. I removed it,
cleaned it, and lubed it. It turns now. (I just wish I had understood it
screwed the wrong direction before I stripped the threads out.)
The sander is about 50% better, but still not right. Any ideas?


Use the other 3.

--
Stoutman
http://www.garagewoodworks.com
(Featuring a NEW look)