Machining thin disks on a lathe
wrote in message
oups.com...
Bruce,
I have 4-soft jaws on my Grizzly 7x12 (bascially same lathe as yours).
Get the Taig 4 Jaw 3 1/4" dia. self centering scroll chuck (steel body)
with aluminum soft jaws 3/4-16 thd. Then get the 3MT to 3/4-16 thread
adapter from LittleMachineShop.com. Then make your own draw bar from
threaded rod to hold the 3MT taper adapter in the spindle.
Yebbut...
I want _independent_ jaws...
|