"Wayne" wrote in message
...
On Tue, 21 Feb 2006 04:50:38 -0500, "Jimmy Martin"
wrote:

The problem is a constant pincushion effect that is concave at left and
right sides of the screen. I have the schematics for this model. Any ideas
on what might be causing this? A bad cap? I'll try some freeze spray on a
few areas.

jimbo



IC007 CXA2043Q is a common failure - results in all sorts of
deflection-related faults.

Wayne

This is a 48 pin surface mount chip. What level of difficulty is it to
desolder and resolder? Can I use a 30 watt fine tip iron and solder wick for
this job? I found the chip for $32.99 at WWW.Bluestar-online.com

I think I will order it and give it a try.

Jimbo