DIYbanter - View Single Post

feenyX2

hi all

i cannot release the magnet on the chuck, this is a surface grinder.
i want to be able to move my test indicator back and forth from the gauge block and the tooling im trying to measure.

having a mag base on off , the chuck on the surface grinder will suck it down cause its on.

any other suggestions

any material maybe i can glue onto the base that is not/or will get magnitized??while the chuck is on.
thanks all

Quote:

Originally Posted by Rich Goldner

Use a mag base with the magnet turned off. For better accuracy use a height
gauge.

"feenyX2" wrote in message
...

hi all,

this situation is on a surface grinder.

sometimes i get this assingments, where i have a 3 step type tooling
part.
1st step is @ .5000 second step at 1.0000 and the 3rd step @2.0000
and they have to be within .0005 and this involves side wheeling each
step also, but i need this for the step part of it.

have you, or do you know of a none mag base i can attach my test
indicator to, and slide it back and forth from the .500 gauge block and
then onto the part for accuracy while the mag on chuck is it on?

or maybe how do i go about making one of something that is non
magnetic

thanks all

--
feenyX2