Drilling a hole in plywood
"Kev" wrote in message
oups.com...
Is there a knack for drilling a hole in plywood or am I using the wrong
type of drill. I need an 8mm dia hole and I am using progressively
larger HSS twist drills but the exit hole is ripping the final ply to
shreds.
Should I consider something like a auger or one og those flat drills,
if they are avialble in 8mm.
The exact size is not important as long as it is about 8mm dia.
Kevin
get a piece of scrap wood behind it if you can and hold if firmly against
it. You then drill through the ply and into the scrap with no ripping
Paul
|