On 6 Feb 2006 10:35:08 -0800, wrote:

Thanks for your help Mike. I already have a picture, what I need is
some dimensions ie. long, wide, thick and so forth. Is there any way
you could help me out?

These are measurements for a guard from an old style
Delta/Miwaukee Accuset 6" joiner.

This may be a little hard to describe but here goes....

Overall length 11"
Width at the widest point 7 1/2"
Width at the narrow end is 1 3/4" with the added square part (for the
spring attach) adding another 3/4" to the width at that end.
The length of the fat part of the guard where it hits the fence is
4 1/2"
Overall thickness is 7/8"
Length of the shaft is approx 3" and hangs down beyond the hole in the
joiner by about 1/4"

If you need any other measurements let me know.

Mike O.