In an earlier contribution to this discussion,
david lang wrote:

Cuprager wrote:
Would you cut on
the top or the bottom and would you put masking tape over the line to
be cut? I presume it would be best to clamp a straight edge for
whatever method is chosen?

Circular saw, cut from the back, use tape - and one of these
http://members.aol.com/woodmiser1/sawbd.htm


By "back", I presume you mean the underside. The cut needs to start from the
*front* rolled edge, and end at the edge which goes against the wall.
--
Cheers,
Roger
______
Please reply to newsgroup.
Reply address IS valid, but is disposable in the event of excessive
spam.