Rex B wrote:
Chuck Sherwood wrote:

I think you should look at the import 7x10 or 7x12 mini-lathes. They
are small and reasonably cheap and will get you started. There are lots
of web sites out there showing how to improve these machines.


Good suggestion. I had forgotten that Darren had to carry it up stairs.
that would eliminate all the Logans except the 9", which are not as common.


If your

projects are small you can look at sherline too. They are a good way
to get
started but you can spend a lot of money on them and you might outgrow
them quickly. Another good option is the import 7x20 lathes but they
cost a lot more than the 7x10 minilathes


I think you mean 9x10 (9x19, 9x18). Agreed. They seem to be available
for $500 used, pretty regularly.

New, take a serious look at the 8X lathes from HF and lathemaster, among
others. They are a big step up from the 7X series, having nothing in
common with them. They are about twice as heavy or more.

The atlas lathes are ok but not nearly up to the level of
the bigger machines like logans, south bends, clausing etc.


A 10" Atlas breaks down into manageable pieces and can be re-assembled
easily. The 54" bed is a handfull for one person, probably weighs close
to 100 lbs. But that's the heaviest part and it's shaped well for carrying.

My favorite small lathe is the myford super 7, but its probably
out of your price range.


I think my Logan 9" is pretty close to a Myford in a lot of ways.
About $800 well-tooled.

An atlas 10X36 can be carried by one person on a dolly (THOUGH A SPOTTER
IS HIGHLY RECOMMENDED)

From having done this 2 months ago i would recommend moving it with the
slide on the bed and the headstock at the base of the dolly

but i will also recommend removing the motor and clutch assembly before
doing it as they do break down in to easy to carry peices