"Bugs" wrote in message
oups.com...
The arbor bracket pn 50175 is not machined corrrectly.
The bearing holes and pivot hole are not parrallel

I agree. Need to check the mechanism for alignment at all settings. The
blade must be exactly parallel with the table slots and at a perfect
right angle to the table top to saw correctly, otherwise the trailing
edge of the blade will make the cut ragged. Sort of visualize pushing a
Skilsaw through a board while cocking the saw right or left. Makes a
really lousy cut.

Well, minor point, but if the fenced side's smooth, as the OP said, it
isn't anything you guys are discussing. It's the stock, not the blade
under those circumstances.