Hello - help required with heating timeswitch. I have searched this group
and also contacted Danfoss tech support but no reply after three days.

I have an elderly dial type timeswitch marked "Superswitch" which controls
the heating on a combi boiler. This works but is getting noisy so I have
decided to replace and have a new Danfoss TS715. Unfortunately the Danfoss
conversion chart and website do not list the Superswitch for conversion.

Currently, on the input side, there are two connections used (plus earth):

N in - neutral mains input
L in - live mains input

The output to the boiler is with three core and earth:

L in - red (in common with above)
L out yellow
N out blue

The Danfoss website carries the TS715 instructions and wiring at
http://www.danfoss-randall.co.uk/default.asp?strSearchResult=tem1019.asp?intPage=98 6|intLang=2|strLang=da|intLevel=2|intLevel2ID=986

Can anyone advise on how I should wire the input / output?

Many thanks in advance.