George wrote:
"Rumpty" wrote in message
news:hrAwf.537$GJ4.28@trndny08...

George,

I don't understand what you are saying here.



You overlay the face frame, on the thinner carcass, and it comes "X"
distance from the reference side. You establish "X" with a piece of wood
that you lay up against the carcass, which you flush up with your fingers.
After marking for your locations, put the thickness gage on the depth fence
of your cutter and leave it for the carcass cuts. When you remove it, you
will be able to make the corresponding cuts in the face frame with the
proper distance.

I'm almost sure it's in my DeWalt instructions.

Fence Shim Blade Cut is X+Y distance from face frame edge, Y from
carcass edge.
X Y



He's already rejected the idea of shims.

Dave