Zymurgy wrote:
It's not flat. It was under wall tiles. When/where the wall
tiles came off it has left the paint patchy. Unless I rub
each section down it'll be uneven otherwise it all needs
to come off !

Get a steel float and some filler. Mix up the filler with
water. Add a little PVA and stir up. Go over the areas
where there is pitting with float and filler. A gentle
rub over when dry with some fine glass-paper on a block
will leave a good surface for decorating. This avoids
the need for a lot of messy work or a re-skim.
--



__________________________________________________ ______________
Sent via the PAXemail system at paxemail.com