In article .com,
says...
Hi,

Looking for a source for a simple wire form spring to latch 2 boxes
together. I can find plenty of places on the web to do custom wire
forms, but can't seem to locate any place that sells stock springs.
I'm looking for something like this -
http://www.dave-cushman.net/bee/gif/zspringoriginal.gif

I'm looking to buy a 100 or so. Anyone know of any place that has
something similar. Actual dimensions are not critical. Any help would
be appreciated. Thanks.....



As I suspect you've already figured out, the setup charge to make 100 of
these will be outrageous. But it'd be a relatively simple part to make
by hand yourself. I made this little die set for an arbor press to bend
1/8" Inconel wire for a batch of furnace baskets into shapes similar to
yours, and to pretty tight tolerances.

http://www.suscom-maine.net/~nsimmon...essBrake01.jpg
http://www.suscom-maine.net/~nsimmon...essBrake02.jpg

If the spring wire isn't too large you can form the loop with a pair of
round nose pliers.

Ned Simmons