On Sat, 31 Dec 2005 16:20:37 -0500, "Fred Garvin"
wrote:

I have a Whirlpool top loading washer, from 1999, it is model LSQ9264HQ0


It has two problems:

1. the water fill level on the largest load size needs adjustment - I have
always had to add a couple of gallons of water or so to get it to the right
level,

The right level? If you are a member of a religion, do you tell it
what the right god is?

If you're going to be a Whilpoolist, you have to accept their level.

this seems common on Whirlpool washers, how can I adjust the maximum
fill level? My friend had the same problem, he replaced the water level

Heretic!!!

switch, and the problem remained, so what I really need is a way to adjust
it, because it seems the factory parts are not quite in calibration.


2. the tub (which is floating by design) has a steep list to the left when
looking at the washer head on, it used to sit centered in the cabinet, what
do I need to replace to have it sit level again?

Lift up the lid, or take the front or back off, and see what is
broken or disconnected.


thanks for any help you can provide,




Remove NOPSAM to email me. Please let
me know if you have posted also.