repairing stripped threads with JB Weld - where's the bolt??
Nick Müller wrote:
Andy Dingley wrote:
Otherwise glue a _stud_ in there with JB Weld and put a nut on the top.
But this is a bodge.
But I would do that with LockTite.
Nick
I'd go for an interference fit... hone the hole carefully and maybe use
a reamer to get it square... lathe a stud just *over* the hole size,
then heat the case, insert the stud, cool. Done.
but, a 1/4" bolt on a tranny? for what? The pan??
_-_-bear
|