After reading everything I could find on the web about Amana washer
leaks, and after pulling the agitator and the drive hub, I decided to
bite the bullet and call in a Sear's repair guy. Everyone who posted
about replacing a hub seal on these units said it was the worst job
they had ever attempted. I have enough headaches already. Thanks for
all who read and responded.

Douglas

On 20 Dec 2005 10:41:18 -0800, "Appliance Repair Aid"
wrote:


Douglas Fifield wrote:
We inherited an Amana washing machine with the house we bought five
years ago. The model is LW8203W2.

This morning it started to leak. The leak is slow and appears to be
coming out of the tub around the central shaft. I suspect a seal is
bad or something is loose.

Any suggestions on further trouble shooting and how to determine if
this is a self repair? I do a fair amount of work on my own cars but
have not torn a washer apart.

Douglas

Hi,

The model is LW8203W2

I found...
LW8203W2/PLW8203W2 LW8203W2B/PLW8203W2A LW8203W2B/PLW8203W2B
LW8203W2-PLW8203W2A

The leak is slow and appears to be
coming out of the tub around the central shaft. I suspect a seal is
bad or something is loose

Loose, not likely...worn out, very possible.

Something that may help...
http://www.applianceaid.com/amana-wash.html#leaking

jeff.
Appliance Repair Aid
http://www.applianceaid.com/