View Single Post
  #2   Report Post  
Posted to alt.home.repair
Dr. Hardcrab
 
Posts: n/a
Default Christmas lights - just light up already


wrote in message
oups.com...
I have a Christmas light problem.

The problem is that I have a 150 set of Twin light blinking Icicles.
Some of the lights/strands aren't lighting and I can't figure out why.

There are 15 "icicles" (strands) on the whole set. Icicles # 1,4,7,10,
& 13 blink first. Then icicles # 2,5,8,11, & 14 blink second. Finally,
icicles, # 3,6,9,12, & 15 blink last; these are the ones that aren't
lighting up. There are a total of 50 bulbs in these and I've tested
every one of them - they all work.

The first light in the first and second strand each have a blinker
light in it. The third strand didn't have one as it was in the very
last light on the whole set. So I moved the blinker into the first
light/bulb of the third string, but they still won't light up.

Any ideas on why they won't light up if all the bulbs are ok? I don't
want to throw them out as I can't find any stores that carry these. I'm
sure they do somewhere but not around here. Also, these were purchased
very cheap at a yard sale and as far as I can see, they had never been
opened. So I have no idea if they're just faulty or if something else
is going on.



I am serious about this:

Throw them away and buy new ones!!! Don't waste your time or your aptience
by trying to fix them. I worked on mine (the Saturday after Thansgiving) for
FOUR HOURS trying to get them to work. I even went out and bought one of
those "Christmas Light Testers". (Sure, it tests the bulb and tells you if
there is power in the light, but that's about it). Problem is: They (whoever
you bought them from) won't have ones to match the ones you have now so you
have to buy ALL NEW ONES!!

Trust me. You may be a little poorer, but you will be MUCH happier.

Feliz Navidad