Spook wrote:
HI All
I have a Maytag washer model LAT8904AAE. The timer is a little over 1
year old. I went to start a load of clothes and the machine will not
fill. I try all cycles same thing it will spin and pump water in all
the right places and with the extra rinse switch on does there too.
When the lid is lifted spinning etc. stops. I thought it was the
timer got a new timer replaced it. . I still same problems. Return
timer place old timer back in. No water supply problems. No gunk in
hose screens. Search web for help. Print out help lose it somewhere!
I got my volt ohm meter out to check the water level switch but can no
longer find the website on how to troubleshoot the water level switch
as well as the water supply valves. I am not very good a reading the
schematic (have the machine's from inside the console) Please any help
would be welcomed. I would like ideas as to best place to get parts
online too.

Thanks

Spook

Hi,

I went to start a load of clothes and the machine will not
fill.

What happens instead?....dead, agitates?

-Some- possible trouble makers...
- push buttons flush for the water temp or levels
- bad fill valve
- bad water level control
- bad fuse in the lid switch ( usually means a sticky/bad switch )
- loose/broken wire

http://www.applianceaid.com/generalwash.html#fill
http://www.applianceaid.com/generalwash.html#WLC

jeff.
Appliance Repair Aid
http://www.applianceaid.com/