View Single Post
  #3   Report Post  
Posted to uk.d-i-y
john
 
Posts: n/a
Default Light Sensitive Light Fittings


"Brian Sharrock" wrote in message
...

"Kev" wrote in message
oups.com...
Has anybody use the type that fit into a bayonet fitting. I bought a
couple to use when I am on holiday but they don't seem to be very
reliable as they aren't coming on when it turns dark. If I then switch
them off then on they will come on and off again at the preset time but
then won't come on again when it gets dark.


I had one of these some time ago .... IIRC, the unit had to inserted
into the bayonet fitting - preferably during daylight - then the
switch turned ON-OFF-ON rapidly, the lamp illuminated briefly
then was turned 'off' by the ambient daylight. Once daylight
dissapeared the lamp illuminated until dawn the following day.
The lamp remained OFF until dusk time when it came ON, again.

Unfortunately the 'memory' only worked while power remained applied
to the bayonet fitting.

Folks were always switching the damm thing OFF and the programming
sequence needed to be undertaken once more. [ON-OFF-ON]
I got fed up with the palaver and junked the device.


I am now thinking of fitting on the light switch one of those immersion
heater timers.

Kevin


--

Brian


Is the light fitting reflecting too much light back onto the sensor causing
it so switch itself back off.