"bschwand" wrote in message
oups.com...
Hi everybody,

I want to build a device similar in some ways to a vacuum chamber. It
should be able to be filled with various gases, a various pressures. In
the chamber, there will be some electrical device. As the device runs,
I want to mesure different things: how the heat produced is eliminated
depending on the type of gas, its pressure, how is EM radiation
released inside, etc.

So basically I need a gas tight enclosure, probably stainless steel or
some other non-reactive metal, with some gas ports on it to fill and
empty it (no problem), a door to swap the device inside (no problem),
some ports for electrical connections (problem).

I do not know how to make an electrically insulated, vacuum and heat
resistant electrical port. The material of the port needs to be as
inert and heat resistant as possible, it can not release gases or any
contaminant under vacuum (thus drilling a hole in the chamber, putting
a rod through and sealing it with epoxy or any resin won't work). I
thought of using glass, but I can not fuse the glass to the metal
because of the different thermal expansion rate of glass and metal.

Any ideas ?

bruno

There are many ways to seal glass to metal. Kovar can be directly sealed to
Pyrex, vacuum tight!

Randy Hansen
SC Glass Tech
Scam Diego, Comi-fornia